STIHL FS 560 C-EM
Top of the range Clearing Saw with extraordinary power and a robust design. The FS 560 C-EM Clearing Saw with STIHL M-Tronic and ErgoStart is a sound choice for professionals. Low vibration levels due to the four-point anti-vibration system. With simple start logic, stop button and fully electronic M-Tronic engine management as standard.
|Power output kW/bhp||2,8/3,8|
|Weight kg 1)||10,2|
|Standard Cutter Blades||Kreissägeblatt 200/8"|
1) Without fuel, cutting tool and without protection
The fully electronic engine management system with memory function regulates the ignition timing and the fuel supply and automatically registers the external temperature, for optimal engine performance, great acceleration and sustained maximum torque. There is only one start position on the combi-lever, so you can easily start the tool with fewer pulls on the cord and without switching.
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting
Ergonomic bicycle handle
When used in conjunction with a harness, the bike handle enables a smooth mowing action. Ideal for working on large areas and allows the machine to be easily guided, thus reducing fatigue.
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Multi-function control handle
All the engine controls are at your fingertips, allowing easy and safe operation.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
Tool free handle adjustment
The central wing nut enables easy adjustment without the use of tools. For transportation and space-saving storage the handle can be rotated through 90°.