STIHL MS 241 C-M
Excellent for harvesting thin wood, a powerful engine performance at a low weight. Standard-fitted with M-Tronic, the long-life air filter system with HD2 filter requires only occasional cleaning, secured nut on the sprocket cover, economical 2-MIX engine, 3/8" PS saw chain for very high cutting performance.
|STIHL Oilomatic saw chain pitch||0.325|
|STIHL Oilomatic saw chain type||Picco Super (PS)|
|Power output kW/bhp||2,2/3|
|Power-to-weight ratio kg/kW||2,1|
|Weight kg 1)||4,7|
|Recommended guide bar length cm/inch||35/14|
1) Without fuel, without bar and chain
Captive bar nuts
Bar nuts held captive in the sprocket cover will not get lost when changing over the cutting attachment.
STIHL M-Tronic (M)
The electronic engine management system with memory function regulates the ignition timing and the fuel supply and automatically registers the external temperature, for optimal engine performance, great acceleration and sustained maximum torque. There is only one start position on the combi-lever, so you can easily start the tool with fewer pulls on the cord and without switching.
Advanced combustion technology
Four overflow channels swirl the fuel-air mix before ignition, allowing for optimum combustion and highly efficient performance. The result: lower consumption and high torque across a broad rpm range.
Pre-separation air filtration system
The innovative long-life air filter system greatly extends the service life of the filter. Air routing removes larger particles of dirt, meaning the actual filter has less to do. So the saw can be used for longer without having to clean the filter.
STIHL anti-vibration system
Intense vibration at the handles of power tools can lead to longer-term effects of blood vessels in the hands and arms. STIHL have therefore developed an effective anti-vibration system where by the oscillations from the machines engine are dampened which significantly reduces vibrations at the handles.
Long-term air cleaner system with HD2-Filter
The longlife air filter system with cyclone pre-separator has a service life up to five times longer than the previous model. The newly developed HD2 filter is made from a water- and oil-repellent polyethylene filter material. It has up to 70 per cent finer pores than fleece and it is easy to clean. The PET-coated round filter cartridge with quick-release lock enables the filter to be fitted and removed in next to no time.
STIHL ElastoStart reduces the shock caused by the compression of the engine during starting. The compression shock is taken away from the users joints and muscles through a spring or rubber element in the starter handle.
Tool free fuel caps
Special caps on the fuel and oil tanks are designed for easy opening and locking without the need for tools.
The decompression valve is part of the easy start-system. The valve should be pressed before starting in order to reduce the compression pressure when starting, as well as the effort needed to pull the starter rope. The decompression valve is semi-automatic, meaning that it must be pressed manually before starting, but then closes automatically.
This controller in the carburettor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburettor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn't need to be cleaned until an appreciable drop in power occurs.
The Ematic chain lubrication system ensures pinpoint lubrication of the saw chain links and guide bar rails. When used with STIHL OILOMATIC saw chain, it will provide maximum lubrication, longer wear and less oil consumption than conventional methods of chain lubrication. The Ematic system can reduce bar oil consumption up to 50%.
Side-mounted chain tensioning
The tensioning screw is located on the side of the chainsaw through the sprocket cover. Chain side tensioning allows the saw chain to be retensioned effortlessly, avoiding any contact with the sharp chain.
Controlled-delivery oil pump
Different bar lengths, wood types and sawing techniques require different amounts of oil. The controlled-delivery oil pump allows the user to select just the right amount of oil for the job at hand.